PRODUCT CATEGORY

Feed Premix

FAQ

Quality Assurance

ISO, FAMIQS, SGS, FDA
Package

Phosphate: 25kg/bag, 50kg/bag, 1100kg/bag, 1200kg/bag, 1250kg/bag or as your request.
Trace element: 25kg/bag, 50kg/bag, 1200kg/bag, 1350kg/bag or as your request.
Amino acid:25kg/bag, 600kg/bag or as your request.
Vitamin:1kg/bag, 25kg/bag, 25kg/drum ect.
Protein: 25kg/bag, 50kg/bag, 600kg/bag, Unpackaged or as your request.
Delivery Time

About 10-30days.
Modes of transport

By air, by sea or by train.
Payment Term

Pre-T/T OR LC at sight.
Packaging and storage

Most pre-mixed packaging bags use three-in-one paper bags, which have the advantages of waterproof, light-proof, no leakage and not easy to damage. Generally 20-25 kg/bag. Since the premix contains a variety of active micro-components, the chance of their interaction will increase, so care should be taken to prevent moisture during storage.
Measurement and mixing

For the measurement of micro-components, electronic scales should be used, accurate to 0.01 grams, and large amounts of raw materials can be used on scales. There are many kinds of mixers. Ordinary vertical mixers are prone to shortcomings such as automatic separation and slow discharge speed due to their slow feeding speed. It is best to use a horizontal double ribbon mixer or a cone mixer.
Amino acid addition problem

Many experiments have confirmed that adding rumen bypass methionine and lysine can increase milk production and economic benefits. This can be added by dairy farms according to specific conditions.
Stability of trace components

Under normal storage and use conditions, the physical and chemical properties of trace elements, vitamins and other components in the premix are stable, but when the moisture content is high, the stability is poor and the loss rate is large. Strictly control the water content of the premix, preferably not more than 5%.
Production technology

Prevent and reduce the loss of active ingredients and ensure the stability and effectiveness of the premix. Choose raw materials with good stability. In terms of vitamins, it is better to choose stabilized raw materials; when using sulfate trace elements, the crystal water should be minimized, or oxides should be used instead, organic trace elements can also be selected; control choline chloride The amount of alkali, because of its strong water absorption, has a destructive effect on vitamins; vitamins should be added in excess, especially when the storage time exceeds 3 months; good quality antioxidants, anti-caking agents, and anti-fungal agents should be added.

Related News

Feed Grade Basic Zinc Carbonate Powder for Livestock

Share to:

Feed Grade Basic Zinc Carbonate Powder for Livestock

5 0 Reviews

Availability:



Color: white powder Sales Models: wholesale Min Order: 10mt Shelf Life: Two years when properly stored Packing: net weight 25kg PP bag,1.2MT bulk bag Storage: stockpiled at the ventilated place, avoiding rain, moisture and insolation. Please handle with care to prevent bag damage, store away from toxic substances.
Inquire Add to Basket

Model:
Zinc(Zn)≥56.00%
Brand:
POLIFAR
Code:
283699

Product Description

【Product name】: zinc carbonate basic industrial grade/cosmetics grade/feed grade

【Chemical formula】: ZnCO3.2Zn(OH)2.H2O

【CAS】: 3486-35-9

【Application】:

1. It’s specially used in transparent rubber products and foaming agent EVA because of its refractive index similar to rubber.

2. Special basic zinc carbonate can be used as a skin protective agent in medical applications.

3. In the industry, it’s used as light astringent and latex products, also is compound of calamine lotion. It can be used as main raw material of rayon production, desulfurizing agent in chemical fertilizer industry and catalyst production.

4. In the oil drilling, basic zinc carbonate reacts with H2S to form ZnS which is stable and insoluble, and that the mud slurry performance is not affected after adding basic zinc carbonate into the mud. So it can eliminate the pollution and corrosion of H2S effectively, also can be used as corrosion inhibitor and sulfur removal agent to process H2S in oil and gas wells.

5. Zinc carbonate can also be widely applied to rubber soles, rubber-plastic product accessories, pipe fittings ,rubber plates, motorbike tires, belts, rubber band, ZPT, desulfurizer agent, zinc stearate, etc.

【Product Advantages】:

Zinc carbonate use hot air drying method to make sure the drying degree of product uniformity, so that the product has uniform fineness, good fluidity and high specific surface area.

【Storage】: Stockpiled at the ventilated place, avoiding rain, moisture and insolation. Please handle with care to prevent bag damage, store away from toxic substances.

【Packing】: Net 25kg/50kg/600kg in Plastic woven bags with PE lining

【Loading】: 14MT/20FCL'; 12MT/20FCL' with pallets

【Shelf Life】: Two years when properly stored

Analysis of Certificate

Testing Item	Standard	Result
Zinc(Zn)	≥56.00%	58.44%
Loss on ignition	≤30.00%	26.28%
Sulphate(SO4)	≤0.40%	0.21%
Total Ca,Na,Mg	≤7500.00 PPM	6628.00PPM
Calcium(Ca)	≤4000.00 PPM	3200.00PPM
Sodium(Na)	≤3500.00 PPM	2200.00PPM
Magnesium(Mg)	≤2000.00 PPM	1228.00PPM
Ferrous(Fe)	≤40.00 PPM	28.00PPM
Lead(Pb)	≤10.00 PPM	5.00PPM
Cadmium(Cd)	≤3.00 PPM	2.08PPM
Chromium(Cr)	≤10.00PPM	0.20PPM
Copper(Cu)	≤50.00PPM	0.60PPM
Tin(Sn)	≤25.00PPM	11.00PPM
Manganese(Mn)	≤50.00PPM	8.00PPM
Nickel(Ni)	≤10.00PPM	4.10PPM
Arsenic(As)	≤2.00PPM	0.10PPM
Mercury(Hg)	≤1.00PPM	0.01PPM
BET surface area	30-50㎡/g	34㎡/g
Tapped density	0.6-0.8㎡/g	0.64㎡/g
Moisture(Dried at 90℃ for 3 hours)	≤2.00%	0.06%
Note: Please fell free to contact us if you have any special requirements.

FAQ

Q1: What is feed-grade zinc carbonate used for?

A1: Feed-grade zinc carbonate is used as a nutritional supplement in animal feed. Zinc is an essential mineral required for various physiological functions in animals, including growth, immunity, and reproduction. Feed-grade zinc carbonate provides a bioavailable source of zinc, which helps prevent or treat zinc deficiency in livestock and poultry. It is commonly added to animal feed formulations to ensure animals receive adequate levels of zinc in their diet, promoting overall health, growth performance, and disease resistance.

Q2: What is the difference between feed-grade zinc oxide and zinc carbonate?

A2: Feed-grade zinc oxide and zinc carbonate are both sources of supplemental zinc used in animal feed, but they differ in their chemical composition and properties:

Chemical Composition: Zinc oxide consists of zinc and oxygen atoms (ZnO), while zinc carbonate contains zinc, carbon, and oxygen atoms (ZnCO3).

Solubility: Zinc oxide is relatively insoluble in water, which means it releases zinc ions slowly in the digestive tract, providing sustained supplementation over time. In contrast, zinc carbonate is more soluble in acidic environments, allowing for faster release of zinc ions in the stomach.

Bioavailability: Zinc oxide is less bioavailable compared to zinc carbonate because of its lower solubility. However, some animal species, such as pigs, can efficiently utilize zinc from zinc oxide due to their ability to produce stomach acid. Zinc carbonate, being more soluble, may offer higher bioavailability, particularly in species with less efficient zinc absorption.

Formulation: Due to its insolubility, zinc oxide is commonly used in premixes and compound feeds where sustained release of zinc is desired. Zinc carbonate may be preferred in situations where rapid zinc supplementation is required or where animals have difficulty absorbing zinc from other sources.